Web Site Source
High Quality Network with DDoS Protection
Established in 1998, Website Source is a 100% U.S. Based Hosting Company (no out-sourcing) with DDoS Protected Network. Call 1-877-467-8001 or chat live with a representative. Website Hosting starts at $6.85, no setup fees. Order today!

Visit www.websitesource.com

Net Firms
Extremely high uptime with unique triple-redundant clustered servers. Prices start at just $4.95/mo. Up to 5 free domain names. Up to 40GB disk space & 1500GB transfer. 24/7 support. Easy-to-use products & award-winning Control Panel. Visit Netfirms Today.

Visit www.netfirms.com

Net Pivotal
NetPivotal.com - Voted #1 for Value and Service!
2000MB Webspace & 80GB Bandwidth only $7.49/mo!
FREE 24/7 Tech Support
Microsoft FrontPage Support

Visit www.netpivotal.com

EV1 Servers
$4.95/monthly. FREE: 2 Lifetime domains + Site Builder
up to 200 GB Data Transfer
up to 20,000 MB Disk Storage
2 lifetime FREE Domain Names
24/7 Tech Support
all packages E-commerce Ready

Visit www.ev1servers.net

Mocha Host
$4.95/monthly. FREE: 2 Lifetime domains + Site Builder
up to 200 GB Data Transfer
up to 20,000 MB Disk Storage
2 lifetime FREE Domain Names
24/7 Tech Support
all packages E-commerce Ready

Visit www.mochahost.com

Sign up now for the newsletter that will keep you abreast of Web Hosting news.


How To Test The Speed Of A Host

Testing speed is not complicated, but it's not very simple either. I will talk about speed in the large sense of the word. Basically speed is a measure on how fast can the data be transmitted between the visitor and the host's server.

You can test a first type of speed by pinging the server. That can be done at the MS-DOS prompt with a simple command: ping serverID, where server ID is either a domain name (e.g. C:>ping yahoo.com), either an IP (e.g. C:> ping

The results should be similar to these:

Reply from bytes=32 time=432ms TTL=45
Reply from bytes=32 time=180ms TTL=45
Reply from bytes=32 time=377ms TTL=46
Reply from bytes=32 time=216ms TTL=45

Ping statistics for
Packets: Sent=4 Received=4 Lost=0 (0% loss)
Approximate round trip times in milli-seconds:
Minimum = 180ms, Maximum = 432ms, Average = 301 ms

To understand the figures, one must first understand how ping works. It's actually pretty basic. When you ping a computer you're sending a message: "Hey! yahoo.com! Are you there?" Then comes the answer: "Yes, I'm here!". By measuring the time it took yahoo.com to receive your message plus the time it took it's message to get to you (and by repeating this process a few times) one get a fair idea on how fast these computers can communicate.

It's all in the time measurement. A ping time of under 200ms is very good, 200 to 400ms is average and 400ms and above are poor ping times. However, poor ping times do not always indicate a problem. If you are pinging servers that are very far away (pinging a server located in USA from a computer located in Australia), poor ping times are normal even for a good connection.

The Loss % represents the percentage of packets (sent messages) that were "lost" (did not return within 1 second). Lost packets are, obviously, not good.

Another way to measure speed is traceroute. Obviously this traces the route between the computer and the server. As the information goes from your computer to the server, it passes through a few so-called routers. A traceroute will tell you how many routers are involved and information about the routers.

The MS-DOS command for traceroute is tracert serverID.

The results should be similar to these:

C:WINDOWS>tracert www.mysitespace.com

Tracing route to www.mysitespace.com []
over a maximum of 30 hops:

1 119 ms 121 ms 120 ms sym0103723m01.bctel.net []
2 107 ms 114 ms 98 ms
3 113 ms 117 ms 123 ms
4 135 ms 122 ms 116 ms
5 134 ms 145 ms 159 ms core7.SanFrancisco.cw.net []
6 144 ms 142 ms 136 ms Hssi2-1-0.BR1.SCL1.Alter.Net []
7 145 ms 152 ms 147 ms 105.ATM3-0.XR1.SCL1.ALTER.NET []
8 138 ms 149 ms 146 ms 195.ATM2-0.TR1.SCL1.ALTER.NET []
9 189 ms 170 ms 209 ms 107.ATM6-0.TR1.NYC1.ALTER.NET []
10 187 ms 180 ms 180 ms 199.ATM7-0.XR1.BOS1.ALTER.NET []
11 194 ms 177 ms 185 ms 191.ATM8-0-0.GW1.BOS1.ALTER.NET []
12 196 ms 208 ms 179 ms NVC.customer.UU.NET []
13 197 ms 206 ms 207 ms www.mysitespace.com []

The numbers on the left are the so-called "hops". The number of hops that it takes to transmit a packet of data from computer A to computer B is the number of routers. In our example there are 13 hops.

As you can see, each response line gives you the HOP #, the round trip times for the 3 packets that were sent and host information (IP address and/or host name).

The roundtrip times for each hop are representative of the time it takes to go from the source to the host for that particular hop and back to the source.

Short times are a good sign. Also, a small number of hops is usually a good sign.

Traceroute is a good way to determine path but, just as ping, it should not be used as the last word when it comes to speed evaluation.

The ultimate test is the download speed test. To do that you should ask the host for a test download file. That's about the best way to judge speed. The goal is to find a host that has the capability of sending at least a few hundred kBytes/second. If you're on a dial-up connection you'll not be able to test this yourself. Read on and you'll find a solution to this particular problem.

Because the host might try to fool you by giving you a test file located on a fast, almost empty server, it might be even better if you'd contact a current customer and ask him/her to post a test file on his account.

The file should be big enough to allow you to see the speed stability over time. A 10-15 Mb file should be enough. Another important aspect is the time of the test. The best times are rush hours actually, when the server are busy. These are are in the morning when most people read their emails (8am on the east coast of the US) and dinner time. Take care to compensate for time differences as not all servers host American websites.

Always keep in mind that all results depend on location, ISP etc. This is why it's good to run a tracert from other computers located in other places of the world (where a significant part of your visitors might come from). Good places where you can do that are http://www.tracert.com/cgi-bin/trace.pl and http://www.traceroute.org.

I recommend you to ask the people at WebHostingTalk.com to help you with your speed test. Usually there are people from all over the world there, so you will get to have the host tested from various parts of the world, through different networks, etc. Don't forget to post the URL of the test file!

For as much as I know the right place for this king of test requests is the "Other reviews" forum located at http://www.webhostingtalk.com/forumdisplay.php?s=&forumid=64.

Do all these things I told you about and you'll get a pretty good idea about the speed of the host you're investigating. Hmm... tough word... "investigating". It makes all these things sound soo... dangerous!

© Copyright 2006-2010 Web-Budget-Hosting.com All Rights Reserved.